Standart Güncellemeleri | Kasım 2018

IEC tarafından güncellenen standartlar aşağıdaki gibidir. Telif hakları gereğince bu standartlar açık olarak yayınlanamamakta ancak TSE  ve IEC sayfasından edinilebilmektedir.

Saygılarımızla

DDM Ankara

Electrical engineering15

  • IEC GUIDE 116:2018
    Guidelines for safety related risk assessment and risk reduction for low voltage equipment
  • IEC 60076-22-1:2018 PRV
    Power transformers – Part 22-1: Power transformer and reactor fittings – Protective devices
  • IEC 60092-350:2014/COR1:2018
    Corrigendum 1 – Electrical installations in ships – Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
  • IEC 60095-1:2018
    Lead-acid starter batteries – Part 1: General requirements and methods of test
  • IEC 60095-1:2018 RLV
    Lead-acid starter batteries – Part 1: General requirements and methods of test
  • IEC 60255-181:2018 PRV
    Measuring relays and protection equipment – Part 181: Functional requirements for frequency protection
  • IEC 60364-5-53:2018 PRV
    Low-voltage electrical installations – Part 5-53: Selection and erection of electrical equipment – Devices for protection for safety, isolation, switching, control and monitoring
  • IEC 61058-2-5:2018
    Switches for appliances – Part 2-5: Particular requirements for change-over selectors
  • IEC 61058-2-5:2018 RLV
    Switches for appliances – Part 2-5: Particular requirements for change-over selectors
  • IEC 61058-2-6:2018
    Switches for appliances – Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery
  • IEC 61058-2-6:2018 RLV
    Switches for appliances – Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery
  • IEC 61952-1:2018 PRV
    Insulators for overhead lines – Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V – Part 1: Definitions, end fittings and designations
  • IEC 62386-220:2018 PRV
    Digital addressable lighting interface – Part 220: Particular requirements for control gear – Centrally supplied emergency operation (device type 19)
  • IEC 62899-201:2016+AMD1:2018 CSV
    Printed electronics – Part 201: Materials – Substrates
  • IEC 62899-201:2016/AMD1:2018
    Amendment 1 – Printed electronics – Part 201: Materials – Substrates

Electricity supply systems3

  • IEC 60364-5-56:2018
    Low-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services
  • IEC 60364-5-56:2018 RLV
    Low-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services
  • IEC TS 61200-101:2018
    Electrical installation guide – Part 101: Application guidelines on extra-low-voltage direct current electrical installations not intended to be connected to a public distribution network

Electromagnetic compatibility1

  • CISPR 16-2-3/AMD1:2018 PRV
    Amendment 1 – Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-3: Methods of measurement of disturbances and immunity – Radiated disturbance measurements

Electronics10

  • IEC 60825-12:2018 PRV
    Safety of laser products – Part 12: Safety of free space optical communication systems used for transmission of information
  • IEC 61051-1:2018
    Varistors for use in electronic equipment – Part 1: Generic specification
  • IEC 61051-1:2018 RLV
    Varistors for use in electronic equipment – Part 1: Generic specification
  • IEC TS 61994-4-1:2018
    Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-1: Piezoelectric materials – Synthetic quartz crystal
  • IEC TS 61994-4-1:2018 RLV
    Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-1: Piezoelectric materials – Synthetic quartz crystal
  • IEC 62047-32:2018 PRV
    Semiconductor devices – Micro-electromechanical devices – Part 32: Test method for the nonlinear vibration of the MEMS resonators
  • IEC 62679-2:2018
    Electronic paper display – Part 2: Essential ratings and characteristics
  • IEC 62951-3:2018
    Semiconductor devices – Flexible and stretchable semiconductor devices – Part 3: Evaluation of thin film transistor characteristics on flexible substrates under bulging
  • IEC TR 62977-2-4:2018
    Electronic displays – Part 2-4: Transparent displays – Overview of application scenarios
  • IEC TR 62977-2-5:2018
    Electronic displays devices – Part 2-5: Transparent displays – Measurements of optical characteristics

Energy & heat transfer engineering2


Environmental protection1

  • ISO 20294:2018
    Graphic technology – Quantification and communication for calculating the carbon footprint of e-media

Fibre optic communications5

  • IEC 60793-1-32:2018
    Optical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability
  • IEC 60793-1-32:2018 RLV
    Optical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability
  • IEC 60869-1:2018
    Fibre optic interconnecting devices and passive components – Fibre optic passive power control devices – Part 1: Generic specification
  • IEC 60869-1:2018 RLV
    Fibre optic interconnecting devices and passive components – Fibre optic passive power control devices – Part 1: Generic specification
  • IEC 62149-10:2018
    Fibre optic active components and devices – Performance standards – Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul

Fluid systems & components for general use1

  • IEC 60665:2018
    A.C. ventilating fans and regulators for household and similar purposes – Methods for measuring performance

Household2


Manufacturing engineering4


Medical electrical equipment2

  • ISO 80369-1:2018
    Small-bore connectors for liquids and gases in healthcare applications – Part 1: General requirements
  • ISO 81060-2:2018
    Non-invasive sphygmomanometers – Part 2: Clinical investigation of intermittent automated measurement type

Metrology & measurement1

  • IEC 60051-9:2018 PRV
    Direct acting indicating analogue electrical measuring instruments and their accessories – Part 9: Recommended test methods

Multimedia8

  • IEC 60268-21:2018
    Sound system equipment – Part 21: Acoustical (output-based) measurements
  • IEC 61937:2018 SER
    Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – ALL PARTS
  • IEC 61937-11:2010+AMD1:2018 CSV
    Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions in LATM/LOAS
  • IEC 61937-11:2010/AMD1:2018
    Amendment 1 – Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions in LATM/LOAS
  • IEC TS 62312-1-1:2018
    Guideline for synchronization of audio and video – Part 1-1: Measurement methods for synchronization of audio and video equipment and systems – General
  • IEC TS 62312-1-1:2018 RLV
    Guideline for synchronization of audio and video – Part 1-1: Measurement methods for synchronization of audio and video equipment and systems – General
  • IEC TS 62312-2:2018
    Guideline for synchronization of audio and video – Part 2: Methods for synchronization of audio and video systems
  • IEC TS 62312-2:2018 RLV
    Guideline for synchronization of audio and video – Part 2: Methods for synchronization of audio and video systems

Safety3


Shipbuilding & marine structures1

  • IEC 63135:2018
    Maritime navigation and radio communication equipment and systems – Automatic identification systems (AIS) – SAR airborne equipment – Operational and performance requirements, methods of test and required test results

Telecommunications11

  • IEC 60728-113:2018/COR1:2018
    Corrigendum 1 – Cable networks for television signals, sound signals and interactive services – Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
  • IEC 61970:2018 SER
    Energy management system application program interface (EMS-API) – ALL PARTS
  • IEC 61970-453:2014+AMD1:2018 CSV
    Energy management system application program interface (EMS-API) – Part 453: Diagram layout profile
  • IEC 61970-453:2014/AMD1:2018
    Amendment 1 – Energy management system application program interface (EMS-API) – Part 453: Diagram layout profile
  • IEC 61970-CGMES:2018 
    Energy management system application program interface (EMS-API) – Common Grid Model Exchange Specification (CGMES)
  • IEC 62351:2018 SER
    Power systems management and associated information exchange – Data and communications security – ALL PARTS
  • IEC 62351-4:2018
    Power systems management and associated information exchange – Data and communications security – Part 4: Profiles including MMS and derivatives
  • IEC TS 62351-100-1:2018
    Power systems management and associated information exchange – Data and communications security – Part 100-1: Conformance test cases for IEC TS 62351-5 and IEC TS 60870-5-7
  • IEC 62746-10-1:2018
    Systems interface between customer energy management system and the power management system – Part 10-1: Open automated demand response
  • IEC TS 62939-2:2018
    Smart grid user interface – Part 2: Architecture and requirements
  • IEC TR 63191:2018
    Demand side power quality management

Terminology4

  • IEC 60092:2018 SER
    Electrical installations in ships – ALL PARTS
  • IEC 60092-101:2018
    Electrical installations in ships – Part 101: Definitions and general requirements
  • IEC TS 61994-4-4:2018
    Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-4: Piezoelectric materials – Single crystal wafers for surface acoustic wave (SAW) devices
  • IEC TS 61994-4-4:2018 RLV
    Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-4: Piezoelectric materials – Single crystal wafers for surface acoustic wave (SAW) devices

Testing2

  • IEC 60068-2:2018 SER
    Environmental testing – Part 2: Tests – ALL PARTS
  • IEC 61010-2-091:2018 PRV
    Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray systems

ISO/IEC publications24

  • ISO/IEC/IEEE 8802-21:2018/COR1:2018
    Corrigendum 1 – Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Part 21-1: Media independent services – Clarification of parameter definition in group session key derivation
  • ISO/IEC 10118-3:2018
    IT Security techniques – Hash-functions – Part 3: Dedicated hash-functions
  • ISO/IEC 14496-5:2001/AMD43:2018
    Amendment 43 – Information technology – Coding of audio-visual objects – Part 5: Reference software – New levels of ALS simple profile, SBR enhancements
  • ISO/IEC 14496-14:2018
    Information technology – Coding of audio-visual objects – Part 14: MP4 file format
  • ISO/IEC 14496-30:2018
    Information technology – Coding of audio-visual objects – Part 30: Timed text and other visual overlays in ISO base media file format
  • ISO/IEC 14776-263:2018
    Information technology – Small Computer System Interface (SCSI) – Part 263: SAS Protocol Layer – 3 (SPL-3)
  • ISO/IEC 14888-3:2018
    IT Security techniques – Digital signatures with appendix – Part 3: Discrete logarithm based mechanisms
  • ISO/IEC TS 17021-11:2018
    Conformity assessment – Requirements for bodies providing audit and certification of management systems – Part 11: Competence requirements for auditing and certification of facility management (FM) management systems
  • ISO/IEC TS 19570:2018
    Programming Languages – Technical Specification for C++ Extensions for Parallelism
  • ISO/IEC 20889:2018
    Privacy enhancing data de-identification terminology and classification of techniques
  • ISO/IEC 21878:2018
    Information technology – Security techniques – Security guidelines for design and implementation of virtualized servers
  • ISO/IEC/IEEE 24748-1:2018
    Systems and software engineering – Life cycle management – Part 1: Guidelines for life cycle management
  • ISO/IEC 26553:2018
    Information technology – Software and systems engineering – Tools and methods for product line realization
  • ISO/IEC 26554:2018
    Information technology – Software and systems engineering – Tools and methods for product line testing
  • ISO/IEC 26556:2018
    Information technology – Software and systems engineering – Tools and methods for product line organizational management
  • ISO/IEC 29112:2018
    Information technology – Office equipment – Test pages and methods for measuring monochrome printer resolution
  • ISO/IEC 29138-1:2018
    Information technology – User interface accessibility – Part 1: User accessibility needs
  • ISO/IEC 29167-22:2018
    Information technology – Automatic identification and data capture techniques – Part 22: Crypto suite SPECK security services for air interface communications
  • ISO/IEC 30118-1:2018
    Information technology – Open Connectivity Foundation (OCF) Specification – Part 1: Core specification
  • ISO/IEC 30118-2:2018
    Information technology – Open Connectivity Foundation (OCF) Specification – Part 2: Security specification
  • ISO/IEC 30118-3:2018
    Information technology – Open Connectivity Foundation (OCF) Specification – Part 3: Bridging specification
  • ISO/IEC 30118-4:2018
    Information technology – Open Connectivity Foundation (OCF) Specification – Part 4: Resource type specification
  • ISO/IEC 30118-5:2018
    Information technology – Open Connectivity Foundation (OCF) Specification – Part 5: Smart home device specification
  • ISO/IEC 30118-6:2018
    Information technology – Open Connectivity Foundation (OCF) Specification – Part 6: Resource to AllJoyn interface mapping specification

IECEE Test Report Forms8

  • IECEE TRF 60335-2-21J:2018
    This Test Report Form applies to: IEC 60335-2-21:2012, AMD1:2018 used in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-21I:2018
    This Test Report Form applies to: IEC 60335-2-21:2012 used in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-65J:2018
    This Test Report Form applies to: IEC 60335-2-65:2002, AMD1:2008, COR1:2004 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014
  • IECEE TRF 60335-2-105C:2018
    This Test Report Form applies to: IEC 60335-2-107:2017 for use in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2010, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 61347-2-11F:2018
    This Test Report Form applies to: IEC 61347-2-11:2001, AMD1:2017 used in conjunction with IEC 61347-1:2015, AMD1:2017
  • IECEE TRF 62612G:2018
    This Test Report Form applies to: IEC 62612:2013, AMD1:2015, AMD2:2018
  • IECEE TRF 62612F:2018
    This Test Report Form applies to: IEC 62612:2013, AMD1:2015
  • IECEE TRF 62752B:2018
    This Test Report Form applies to: IEC 62752:2016, AMD1:2018

DDM Ankara

İletişim: [email protected]