Standart Güncellemeleri | Kasım 2018
IEC tarafından güncellenen standartlar aşağıdaki gibidir. Telif hakları gereğince bu standartlar açık olarak yayınlanamamakta ancak TSE ve IEC sayfasından edinilebilmektedir.
Saygılarımızla
DDM Ankara
Electrical engineering15
- IEC GUIDE 116:2018
Guidelines for safety related risk assessment and risk reduction for low voltage equipment - IEC 60076-22-1:2018 PRV
Power transformers – Part 22-1: Power transformer and reactor fittings – Protective devices - IEC 60092-350:2014/COR1:2018
Corrigendum 1 – Electrical installations in ships – Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications - IEC 60095-1:2018
Lead-acid starter batteries – Part 1: General requirements and methods of test - IEC 60095-1:2018 RLV
Lead-acid starter batteries – Part 1: General requirements and methods of test - IEC 60255-181:2018 PRV
Measuring relays and protection equipment – Part 181: Functional requirements for frequency protection - IEC 60364-5-53:2018 PRV
Low-voltage electrical installations – Part 5-53: Selection and erection of electrical equipment – Devices for protection for safety, isolation, switching, control and monitoring - IEC 61058-2-5:2018
Switches for appliances – Part 2-5: Particular requirements for change-over selectors - IEC 61058-2-5:2018 RLV
Switches for appliances – Part 2-5: Particular requirements for change-over selectors - IEC 61058-2-6:2018
Switches for appliances – Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - IEC 61058-2-6:2018 RLV
Switches for appliances – Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - IEC 61952-1:2018 PRV
Insulators for overhead lines – Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V – Part 1: Definitions, end fittings and designations - IEC 62386-220:2018 PRV
Digital addressable lighting interface – Part 220: Particular requirements for control gear – Centrally supplied emergency operation (device type 19) - IEC 62899-201:2016+AMD1:2018 CSV
Printed electronics – Part 201: Materials – Substrates - IEC 62899-201:2016/AMD1:2018
Amendment 1 – Printed electronics – Part 201: Materials – Substrates
Electricity supply systems3
- IEC 60364-5-56:2018
Low-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services - IEC 60364-5-56:2018 RLV
Low-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services - IEC TS 61200-101:2018
Electrical installation guide – Part 101: Application guidelines on extra-low-voltage direct current electrical installations not intended to be connected to a public distribution network
Electromagnetic compatibility1
- CISPR 16-2-3/AMD1:2018 PRV
Amendment 1 – Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-3: Methods of measurement of disturbances and immunity – Radiated disturbance measurements
Electronics10
- IEC 60825-12:2018 PRV
Safety of laser products – Part 12: Safety of free space optical communication systems used for transmission of information - IEC 61051-1:2018
Varistors for use in electronic equipment – Part 1: Generic specification - IEC 61051-1:2018 RLV
Varistors for use in electronic equipment – Part 1: Generic specification - IEC TS 61994-4-1:2018
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-1: Piezoelectric materials – Synthetic quartz crystal - IEC TS 61994-4-1:2018 RLV
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-1: Piezoelectric materials – Synthetic quartz crystal - IEC 62047-32:2018 PRV
Semiconductor devices – Micro-electromechanical devices – Part 32: Test method for the nonlinear vibration of the MEMS resonators - IEC 62679-2:2018
Electronic paper display – Part 2: Essential ratings and characteristics - IEC 62951-3:2018
Semiconductor devices – Flexible and stretchable semiconductor devices – Part 3: Evaluation of thin film transistor characteristics on flexible substrates under bulging - IEC TR 62977-2-4:2018
Electronic displays – Part 2-4: Transparent displays – Overview of application scenarios - IEC TR 62977-2-5:2018
Electronic displays devices – Part 2-5: Transparent displays – Measurements of optical characteristics
Energy & heat transfer engineering2
- IEC 60964:2018
Nuclear power plants – Control rooms – Design - IEC 60964:2018 RLV
Nuclear power plants – Control rooms – Design
Environmental protection1
- ISO 20294:2018
Graphic technology – Quantification and communication for calculating the carbon footprint of e-media
Fibre optic communications5
- IEC 60793-1-32:2018
Optical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability - IEC 60793-1-32:2018 RLV
Optical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability - IEC 60869-1:2018
Fibre optic interconnecting devices and passive components – Fibre optic passive power control devices – Part 1: Generic specification - IEC 60869-1:2018 RLV
Fibre optic interconnecting devices and passive components – Fibre optic passive power control devices – Part 1: Generic specification - IEC 62149-10:2018
Fibre optic active components and devices – Performance standards – Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul
Fluid systems & components for general use1
- IEC 60665:2018
A.C. ventilating fans and regulators for household and similar purposes – Methods for measuring performance
Household2
- IEC 60335-2-15:2012+AMD1:2016+AMD2:2018 CSV
Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids - IEC 60335-2-15:2012/AMD2:2018
Amendment 1 – Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids
Manufacturing engineering4
- IEC 60974-2:2018 PRV
Arc welding equipment – Part 2: Liquid cooling systems - IEC 60974-3:2018 PRV
Arc welding equipment – Part 3: Arc striking and stabilizing devices - IEC 60974-5:2018 PRV
Arc welding equipment – Part 5: Wire feeders - IEC 60974-7:2018 PRV
Arc welding equipment – Part 7: Torches
Medical electrical equipment2
- ISO 80369-1:2018
Small-bore connectors for liquids and gases in healthcare applications – Part 1: General requirements - ISO 81060-2:2018
Non-invasive sphygmomanometers – Part 2: Clinical investigation of intermittent automated measurement type
Metrology & measurement1
- IEC 60051-9:2018 PRV
Direct acting indicating analogue electrical measuring instruments and their accessories – Part 9: Recommended test methods
Multimedia8
- IEC 60268-21:2018
Sound system equipment – Part 21: Acoustical (output-based) measurements - IEC 61937:2018 SER
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – ALL PARTS - IEC 61937-11:2010+AMD1:2018 CSV
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions in LATM/LOAS - IEC 61937-11:2010/AMD1:2018
Amendment 1 – Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions in LATM/LOAS - IEC TS 62312-1-1:2018
Guideline for synchronization of audio and video – Part 1-1: Measurement methods for synchronization of audio and video equipment and systems – General - IEC TS 62312-1-1:2018 RLV
Guideline for synchronization of audio and video – Part 1-1: Measurement methods for synchronization of audio and video equipment and systems – General - IEC TS 62312-2:2018
Guideline for synchronization of audio and video – Part 2: Methods for synchronization of audio and video systems - IEC TS 62312-2:2018 RLV
Guideline for synchronization of audio and video – Part 2: Methods for synchronization of audio and video systems
Safety3
- IEC 60335-2-8:2012+AMD1:2015+AMD2:2018 CSV
Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances - IEC 60335-2-8:2012/AMD2:2018
Amendment 2 – Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances - IEC 60825:2018 SER
Safety of laser products – ALL PARTS
Shipbuilding & marine structures1
- IEC 63135:2018
Maritime navigation and radio communication equipment and systems – Automatic identification systems (AIS) – SAR airborne equipment – Operational and performance requirements, methods of test and required test results
Telecommunications11
- IEC 60728-113:2018/COR1:2018
Corrigendum 1 – Cable networks for television signals, sound signals and interactive services – Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only - IEC 61970:2018 SER
Energy management system application program interface (EMS-API) – ALL PARTS - IEC 61970-453:2014+AMD1:2018 CSV
Energy management system application program interface (EMS-API) – Part 453: Diagram layout profile - IEC 61970-453:2014/AMD1:2018
Amendment 1 – Energy management system application program interface (EMS-API) – Part 453: Diagram layout profile - IEC 61970-CGMES:2018
Energy management system application program interface (EMS-API) – Common Grid Model Exchange Specification (CGMES) - IEC 62351:2018 SER
Power systems management and associated information exchange – Data and communications security – ALL PARTS - IEC 62351-4:2018
Power systems management and associated information exchange – Data and communications security – Part 4: Profiles including MMS and derivatives - IEC TS 62351-100-1:2018
Power systems management and associated information exchange – Data and communications security – Part 100-1: Conformance test cases for IEC TS 62351-5 and IEC TS 60870-5-7 - IEC 62746-10-1:2018
Systems interface between customer energy management system and the power management system – Part 10-1: Open automated demand response - IEC TS 62939-2:2018
Smart grid user interface – Part 2: Architecture and requirements - IEC TR 63191:2018
Demand side power quality management
Terminology4
- IEC 60092:2018 SER
Electrical installations in ships – ALL PARTS - IEC 60092-101:2018
Electrical installations in ships – Part 101: Definitions and general requirements - IEC TS 61994-4-4:2018
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-4: Piezoelectric materials – Single crystal wafers for surface acoustic wave (SAW) devices - IEC TS 61994-4-4:2018 RLV
Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection – Glossary – Part 4-4: Piezoelectric materials – Single crystal wafers for surface acoustic wave (SAW) devices
Testing2
- IEC 60068-2:2018 SER
Environmental testing – Part 2: Tests – ALL PARTS - IEC 61010-2-091:2018 PRV
Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray systems
ISO/IEC publications24
- ISO/IEC/IEEE 8802-21:2018/COR1:2018
Corrigendum 1 – Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Part 21-1: Media independent services – Clarification of parameter definition in group session key derivation - ISO/IEC 10118-3:2018
IT Security techniques – Hash-functions – Part 3: Dedicated hash-functions - ISO/IEC 14496-5:2001/AMD43:2018
Amendment 43 – Information technology – Coding of audio-visual objects – Part 5: Reference software – New levels of ALS simple profile, SBR enhancements - ISO/IEC 14496-14:2018
Information technology – Coding of audio-visual objects – Part 14: MP4 file format - ISO/IEC 14496-30:2018
Information technology – Coding of audio-visual objects – Part 30: Timed text and other visual overlays in ISO base media file format - ISO/IEC 14776-263:2018
Information technology – Small Computer System Interface (SCSI) – Part 263: SAS Protocol Layer – 3 (SPL-3) - ISO/IEC 14888-3:2018
IT Security techniques – Digital signatures with appendix – Part 3: Discrete logarithm based mechanisms - ISO/IEC TS 17021-11:2018
Conformity assessment – Requirements for bodies providing audit and certification of management systems – Part 11: Competence requirements for auditing and certification of facility management (FM) management systems - ISO/IEC TS 19570:2018
Programming Languages – Technical Specification for C++ Extensions for Parallelism - ISO/IEC 20889:2018
Privacy enhancing data de-identification terminology and classification of techniques - ISO/IEC 21878:2018
Information technology – Security techniques – Security guidelines for design and implementation of virtualized servers - ISO/IEC/IEEE 24748-1:2018
Systems and software engineering – Life cycle management – Part 1: Guidelines for life cycle management - ISO/IEC 26553:2018
Information technology – Software and systems engineering – Tools and methods for product line realization - ISO/IEC 26554:2018
Information technology – Software and systems engineering – Tools and methods for product line testing - ISO/IEC 26556:2018
Information technology – Software and systems engineering – Tools and methods for product line organizational management - ISO/IEC 29112:2018
Information technology – Office equipment – Test pages and methods for measuring monochrome printer resolution - ISO/IEC 29138-1:2018
Information technology – User interface accessibility – Part 1: User accessibility needs - ISO/IEC 29167-22:2018
Information technology – Automatic identification and data capture techniques – Part 22: Crypto suite SPECK security services for air interface communications - ISO/IEC 30118-1:2018
Information technology – Open Connectivity Foundation (OCF) Specification – Part 1: Core specification - ISO/IEC 30118-2:2018
Information technology – Open Connectivity Foundation (OCF) Specification – Part 2: Security specification - ISO/IEC 30118-3:2018
Information technology – Open Connectivity Foundation (OCF) Specification – Part 3: Bridging specification - ISO/IEC 30118-4:2018
Information technology – Open Connectivity Foundation (OCF) Specification – Part 4: Resource type specification - ISO/IEC 30118-5:2018
Information technology – Open Connectivity Foundation (OCF) Specification – Part 5: Smart home device specification - ISO/IEC 30118-6:2018
Information technology – Open Connectivity Foundation (OCF) Specification – Part 6: Resource to AllJoyn interface mapping specification
IECEE Test Report Forms8
- IECEE TRF 60335-2-21J:2018
This Test Report Form applies to: IEC 60335-2-21:2012, AMD1:2018 used in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016 - IECEE TRF 60335-2-21I:2018
This Test Report Form applies to: IEC 60335-2-21:2012 used in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016 - IECEE TRF 60335-2-65J:2018
This Test Report Form applies to: IEC 60335-2-65:2002, AMD1:2008, COR1:2004 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014 - IECEE TRF 60335-2-105C:2018
This Test Report Form applies to: IEC 60335-2-107:2017 for use in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2010, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016 - IECEE TRF 61347-2-11F:2018
This Test Report Form applies to: IEC 61347-2-11:2001, AMD1:2017 used in conjunction with IEC 61347-1:2015, AMD1:2017 - IECEE TRF 62612G:2018
This Test Report Form applies to: IEC 62612:2013, AMD1:2015, AMD2:2018 - IECEE TRF 62612F:2018
This Test Report Form applies to: IEC 62612:2013, AMD1:2015 - IECEE TRF 62752B:2018
This Test Report Form applies to: IEC 62752:2016, AMD1:2018
Withdrawn/Replaced publications 14
| Withdrawn | TC/SC | Replaced by |
|---|---|---|
| IEC 61058-2-5:2010 | 23J | IEC 61058-2-5:2018 |
| IEC 60095-1:2006 | 21 | IEC 60095-1:2018 |
| IEC 60869-1:2012 | 86B | IEC 60869-1:2018 |
| IEC TS 61994-4-1:2007 | 49 | IEC TS 61994-4-1:2018 |
| IEC TS 61994-4-4:2010 | 49 | IEC TS 61994-4-4:2018 |
| IEC 60793-1-32:2010 | 86A | IEC 60793-1-32:2018 |
| IEC 61058-2-6:2016 | 23J | IEC 61058-2-6:2018 |
| IEC PAS 63015:2016 | 111 | Withdrawn |
| ISO/IEC 29173-1:2012 | JTC 1/SC 31 | Withdrawn |
| ISO/IEC 29175:2012 | JTC 1/SC 31 | Withdrawn |
| ISO/IEC 29176:2011 | JTC 1/SC 31 | Withdrawn |
| ISO/IEC 29177:2016 | JTC 1/SC 31 | Withdrawn |
| ISO/IEC 29178:2012 | JTC 1/SC 31 | Withdrawn |
| ISO/IEC 29179:2012 | JTC 1/SC 31 | Withdrawn |
DDM Ankara
İletişim: [email protected]
